Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
SUPPORT HPM!  MAKE A DONATION!




Pages: [1]   Go Down
Print
Author Topic: 3g 130 amp alternator  (Read 117 times)
shopo27
Official HPM member
Full Member
*****
Offline Offline

Posts: 114


Email
« on: January 12, 2012, 11:43:01 AM »

What year mustangs run a 130 amp alternators.  Would like to upgrade my 93 hatch
Logged

FOX DIVISION- 93 HATCH- FEW BOLT ONS
ChadTT89GT
Administrator
Hero Member
*****
Offline Offline

Posts: 3129



Email
« Reply #1 on: January 12, 2012, 11:49:42 AM »

I believe 94-95 Mustangs had 130s.  Google "Mustang 3G upgrade" and you'll get a ton of hits.  Several other cars had them as well including Tauruses but I don't know the specific years.  Make sure you do a wiring upgrade when you swap the alternator out.  There are kits available.
Logged

306 with a few bolt-ons... honest!
frankenstang
Treasurer
Hero Member
*****
Online Online

Posts: 3418


Project Black Crap Lives on. RIP Russ!


« Reply #2 on: February 08, 2012, 06:55:44 AM »

PA Performance has a complete kit with with all the wiring too.  Not too hard.
You also have to do some grinding on the alternator bracket to get the clearance
needed.  SSP 1993 Mustangs had the 3G also but I cannot confirm this.  The 3G
units (third generation) come stock in 95 AMP and 130 AMP units.  The case is also
slightly larger on the 130 AMP unit.  The biggest difference in the wiring is the large
terminal on the back of the alternator.  This is wired directly to the battery, thereby
taking most of the electrical load off the stock wiring.  The separate wiring is a must
on the 130 AMP unit.  Check out the PA Performance website.
Logged
shopo27
Official HPM member
Full Member
*****
Offline Offline

Posts: 114


Email
« Reply #3 on: February 08, 2012, 09:15:05 AM »

Shoots   thanks for the info.
Logged

FOX DIVISION- 93 HATCH- FEW BOLT ONS
hyperstang00
Official HPM member
Hero Member
*****
Offline Offline

Posts: 5027


Hawaii 5.0 - FOX DIVISION


Email
« Reply #4 on: February 08, 2012, 11:55:16 AM »

Here mine...





Just get the wiring kit like Steve said and all is good.  Gotta grind a bit on the bracket..but real minah'z...I did mine with a dremel.  I got mine from American Muscle.  It's a must when you run HID's, stereo and A/C..lol!!!!
Logged


FOX DIVISION - 90 GT Vert - A FEW BOLT ON'S
Pages: [1]   Go Up
Print
Jump to: