Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
Welcome to:
HAWAII PERFORMANCE MUSTANGS
Hawaii's largest and most active mustang club
SUPPORT HPM!  MAKE A DONATION!
Pages: 1 [2]   Go Down
Print
Author Topic: Baer 14" 6 piston brakes  (Read 3073 times)
humbleLX
Retired Director/Treasurer
Official HPM member
Hero Member
*****
Offline Offline

Posts: 37360
Awards:


WWW Email
« Reply #15 on: September 04, 2017, 12:02:20 PM »

Terminators didnt come out with brembos....they came with Australian PBR brakes...
Brembos didnt show up factory on fords till the Shelbys came out....

someone correct me if im wrong...
correct.
Logged


took me 20 minutes with a hand from my room mate.
terminator
Hero Member
*****
Offline Offline

Posts: 2326



« Reply #16 on: September 04, 2017, 05:04:01 PM »

The pbrs are good - I had those stock on my 95 corvette stamped Made in Australia pretty funny
Logged

recovering Roush addict
Joe Babooze
Official HPM member
Hero Member
*****
Offline Offline

Posts: 2593


Suffering from occasional irregularity


Email
« Reply #17 on: September 14, 2017, 11:41:20 PM »

Terminators didnt come out with brembos....they came with Australian PBR brakes...
Brembos didnt show up factory on fords till the Shelbys came out....

someone correct me if im wrong...

Correct sir. IMO six piston is  kind of overkill for the street.  Moving up to the 4 piston Brembos on my 2014 GT.  14" rotors and 4 pistons is plenty for me.
« Last Edit: September 14, 2017, 11:42:55 PM by Joe Babooze » Logged

One of these days, Alice!
Don Johnston
Official HPM member
Hero Member
*****
Offline Offline

Posts: 7880



« Reply #18 on: September 15, 2017, 11:59:30 AM »

Like my 6 piston Brembo at each corner, especially on the curvy tracks.  But, correct, that for Hawaii clogged street use, not really needed unless you like Tantalus Drive runs that require dodging inattentive skateboarders. Cool
Logged
Joe Babooze
Official HPM member
Hero Member
*****
Offline Offline

Posts: 2593


Suffering from occasional irregularity


Email
« Reply #19 on: September 15, 2017, 05:29:28 PM »

Hey yours got the 15" rotors or the 14"? I figured harder to clean with the 6 piston setup and I wasn't about to go to 20" rims for added clearance.  Just waiting for YRC freight to deliver.  Can't wait to use my power bleeder.  Sick and tired of doing it the old school way.
Logged

One of these days, Alice!
Don Johnston
Official HPM member
Hero Member
*****
Offline Offline

Posts: 7880



« Reply #20 on: September 15, 2017, 07:39:21 PM »

Oops, correction. Mine are 6 piston Baer brakes front and rear, 14 inch rotors, rims are 19 inch to clear the calipers.  They switched to Baer in 2013.  Some may have gotten Wilwood systems.
Logged
Joe Babooze
Official HPM member
Hero Member
*****
Offline Offline

Posts: 2593


Suffering from occasional irregularity


Email
« Reply #21 on: September 16, 2017, 04:13:28 PM »

Ok, gotcha. The ones I ordered are the Ford Performance Br mob upgrade kit.  Basically the 2007-2012 GT500 brakes with the braided steel lines.  Figured guaranteed to fit since I'm using 19" wheels all around, also Ford Performance Boss LS.  Figure this will be a good upgrade for the next planned mod.  Trying to keep a factory appearance with similar performance to the GT 500 but using the Coyote instead.  With the Ford parts bin at your disposal, it's no wonder the S197 platform lends itself to infinite mod options.
Logged

One of these days, Alice!
Don Johnston
Official HPM member
Hero Member
*****
Offline Offline

Posts: 7880



« Reply #22 on: September 16, 2017, 07:02:46 PM »

Wow, new brake series.  Baer, Brembo, Babooze...is there no stop to this.  Groan.
Logged
Joe Babooze
Official HPM member
Hero Member
*****
Offline Offline

Posts: 2593


Suffering from occasional irregularity


Email
« Reply #23 on: September 16, 2017, 07:14:50 PM »

Ba ba ba booze Babooze Babooze Babooze.

Nice musical ring to it.
Logged

One of these days, Alice!
Pages: 1 [2]   Go Up
Print
Jump to: